Micro E-Nail Quartz E-Banger Kit
1000°F
RAPID HEAT-UP WITH NO OVERSHOOT AND CONSISTENT TEMPS
Build Your Kit
14mm M/25 Quartz E-banger + Gold Multi Tool Carb Cap
Beehive Skin
Gold V2 Coil Stand
WHAT'S INCLUDED
- Coil Stand
- User Manual
- 5ft Long Heater Coil
- 6ft Long Power Cord
- Micro E-Nail Controller
- 1x Terp Cap Set OR Terp Marble Set
- 1x Quartz E-Banger, Auto Spinner Quartz E-Banger, Terp E-Slurper OR Quartz Orb Terp E-Slurper
1 Year Warranty on Coils, 2 Year Warranty on Controllers
Powered by an advanced microprocessor for real time temperature reading and temperature stabilization unlike PIDs used by other E-Nails on the market. The Quartz Banger E-Nail Kit is the ideal choice for users who value optimum flavor production at lower temperatures. This kit is design for maximizing the flavor retention and maximizing the effects of your concentrates when low temp dabbing. All quartz enail bangers features chamfered edges for easy accommodation with a wide range of carb caps and thick walls for heat retention. The main driver of this setup is the 25mm Quartz E-Banger which is manufactured to very tight tolerances resulting in a perfect fit with the coil. When paired with our axial coils which heat the entirety of the dish (sides and bottom) you get a truly outstanding vaporization experience. You can also pair this setup with opal or SIC pearls which evenly distribute and move your concentrates for low temp dabs and preventing charring/burning. The design of our quartz banger e-nail kit has been tried, tested and improved throughout the years and has proven to provide users with a consistent and outstanding dabbing experience that will impress even the most experienced concentrate users.
Specifications:
- Max Temp : 0°F-1000°F
- Plug Type : 120V USA
- Power Cord Length : 6ft
- Controller Dimensions : 5"x 3" x 2"
- Coil Connection: 5PIN Female XLR
- PIN Wiring: PIN 1: TC+ , PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
Just In Case You Were Wondering...
Why is my coil not heating up?
Eventually your coil will begin to fluctuate in temperature and start to show EEEE or room temperature. This means that your coil has reached the end of its lifespan and needs to be replaced. Coils do die overtime and need to be replaced. This is true with all E-Nails and coils should be replaced at least once a year.
What nail or bangers can I use with the coil?
If you’re buying a kit without a nail/banger included, always ensure that the nail/banger you plan on using with your unit is not one intended for torch use only. Torch bangers aren't made with precise measurements as they're usually rounded up or down in size which is an issue when trying to use them with an E-Nail coil as they have to be same exact size to fit and E-Nail bangers usually have a mechanism on the banger to hold the coil(a stem or hook). So in short, it's always safer to get a nail/banger from the same company you purchase the E-Nail from as it's guaranteed to fit.
Are High Five E-Nails compatible with other E-Nail coils?
Most E-Nail brands wire their units and coils differently. So not all E-Nails and coils are wired the same. Always ensure that if you’re using a coil and E-Nail from two different brands that they’re compatible and the wiring is the same otherwise you run the risk of potentially damaging both items.
What does the warranty cover?
High Five offers a 2 year warranty on all E-Nail controllers and a 1 year warranty on coils. The warranty solely covers against failure of the electronics, craftsmanship and quality. The warranty does not cover any forms of accidental damage, theft, misuse or neglect including:
- Opening the E-Nail housing.
- Any forms of physical damage.
- Burning the coil sheath exposing the internal wiring.
- Using coils or power cords not from High Five (unless with a compatible universal adapter from High Five).
- Exposing the controller, coil or its any components to any liquids, gels, moisture.
- Using the coil at temperatures above +1000°F for a prolonged period of time, resulting in a noticeable burnt or black appearance.
- Modifying the coil head in any way, such as bending the rod or enlarging the coil head to fit a nail/banger, resulting in noticeable spacing between the coil wraps.
How long can I keep the E-Nail running?
Technically you can keep your unit running for as long as you choose. Coils do indeed have a lifespan, the longer the coil is heating the more that the lifespan is used. It is recommended to avoid using the coil at 900F for more than a few minutes and if you do not intend on using the unit within an hour to at least turn off the coil power to preserve the lifespan.