LCD E-Nail Titanium Herb Nail & Rig Kit
RAPID HEAT-UP WITH NO OVERSHOOT AND CONSISTENT TEMPS
Build Your Kit
- Glass Rig
- Coil Stand
- ISO Station
- User Manual
- 20mm Heater Coil
- Poker/Packer Tool
- Titanium Herb Nail
- 6ft Long Power Cord
- LCD E-Nail Controller
- Claimsaver Dropdown
- Stainless Steel Mesh Screen
- 15 x 6mm SIC Spheres
1 Year Warranty on Coils, 2 Year Warranty on Controllers
Recommended Temperature Range: 500°F - 700°F
Recommended Starting Temperature: 500°F
Powered by an advanced microprocessor for real time temperature reading and temperature stabilization unlike PIDs used by other E-Nails on the market. The Titanium Herb E-Nail Rig Kit is the ideal choice for users who value precise temperature control and stabilization. This kit features a universal titanium herb nail which can accommodate up to a half gram of flower.
The herb nail utilizes convection for vaporization which is the most ideal heating method for flower. Convection vaporization heats the air which in turn heats your flower rather than conduction which heats flower through direct contact and results in burning and charring which produces smoke. Convection evenly heats your material to ensure minimal waste and allows you to vaporize your flower at low enough temperatures to experience the terpenes and medicinal effects of the flower.
The Titanium Herb Nail utilizes SIC or Opal spheres to heat up the air as it flows through the airway of the nail to your flower. Includes both male and female joint adapters allowing it to be used with virtually any rig.
Made of high-quality grade 2 titanium and 3rd party lab tested for purity. The titanium body is extremely durable and aids in temperature stabilization and heat retention.
The titanium herb E-Nail nail kit is extremely easy to maintain and clean, titanium is also practically indestructible. This Herb E-Nail kit is perfect for travel and daily use, a plug and play system for vaporizing flower using convection.
Max Temp : 0°F-1000°F
Plug Type : 120V USA
Power Cord Length : 6ftController
Dimensions : 5"x 3" x 2"Coil
Connection: 5PIN Female XLRPIN
Wiring: PIN 1: TC+ , PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
Just In Case You Were Wondering...
Why is my coil not heating up?
Eventually your coil will begin to fluctuate in temperature and start to show EEEE or room temperature. This means that your coil has reached the end of its lifespan and needs to be replaced. Coils do die overtime and need to be replaced. This is true with all E-Nails and coils should be replaced at least once a year.
What nail or bangers can I use with the coil?
If you’re buying a kit without a nail/banger included, always ensure that the nail/banger you plan on using with your unit is not one intended for torch use only. Torch bangers aren't made with precise measurements as they're usually rounded up or down in size which is an issue when trying to use them with an E-Nail coil as they have to be same exact size to fit and E-Nail bangers usually have a mechanism on the banger to hold the coil(a stem or hook). So in short, it's always safer to get a nail/banger from the same company you purchase the E-Nail from as it's guaranteed to fit.
Are High Five E-Nails compatible with other E-Nail coils?
Most E-Nail brands wire their units and coils differently. So not all E-Nails and coils are wired the same. Always ensure that if you’re using a coil and E-Nail from two different brands that they’re compatible and the wiring is the same otherwise you run the risk of potentially damaging both items.
What does the warranty cover?
High Five offers a 2 year warranty on all E-Nail controllers and a 1 year warranty on coils. The warranty solely covers against failure of the electronics, craftsmanship and quality. The warranty does not cover any forms of accidental damage, theft, misuse or neglect including:
- Opening the E-Nail housing.
- Any forms of physical damage.
- Burning the coil sheath exposing the internal wiring.
- Using coils or power cords not from High Five (unless with a compatible universal adapter from High Five).
- Exposing the controller, coil or its any components to any liquids, gels, moisture.
- Using the coil at temperatures above +1000°F for a prolonged period of time, resulting in a noticeable burnt or black appearance.
- Modifying the coil head in any way, such as bending the rod or enlarging the coil head to fit a nail/banger, resulting in noticeable spacing between the coil wraps.
How long can I keep the E-Nail running?
Technically you can keep your unit running for as long as you choose. Coils do indeed have a lifespan, the longer the coil is heating the more that the lifespan is used. It is recommended to avoid using the coil at 900F for more than a few minutes and if you do not intend on using the unit within an hour to at least turn off the coil power to preserve the lifespan.
This product has no reviews yet.